Temperature sensor Galltec TPC active

The temperature humidity sensor series „xP“ are compact sensors in stick version with fixed connected cable.
The relative humidity is measured by a capacitive sensing element and the value will be placed at the output as analogue signal.
The temperature measurement is made by a P100-resistor (1/3 DIN).
The signal is available as an analogue output as well.
The sensors are obtainable as single temperature probe or as combined sensor for temperature and humidity measurement.

Characteristic	Description / Value
Measurement principle	Pt100 1/3 DIN acc. DIN EN 60751
Measurement range	-30 ... +70 °C
Slope (Data Logger Meteo-40)	100
Offset (Data Logger Meteo-40)	-30
Accuracy	± 0.2 K (-27 ... +80 °C)
Additional error	± 0.007 K/K (<10 °C, >40 °C)
Operating range
Ambient temperature	-40 ... +80 °C
Minimum air speed (across sensor)	≥ 0.5 m/s
Electrical data
Output signal	0 ... 1 V
Operating supply	6 ... 30 VDC
Power consumption	<1 mA
General
Connection	7-pol plug for shielded cable
Dimensions	155 x Ø 20 mm
Weight	approx. 0.1 kg
Protection Sensor	IP 30
Protection Electronic	IP 65
Protection Coupling	IP 67
Manufacturer	Galltec

Sensor	Plug Pin No.	Ammonit Cable Wire Colour	Meteo-40 Analog Voltage	Supply Sensor
Temperature Output Voltage	3	white	Ax
Ground	2	blue	Bx
Supply	4	red		9 ... 30 VDC*
Ground	1	black		Main Ground

*Supply voltage for usage with Meteo-40 data loggers
Cable type: LiYCY 4 x 0.25 mm²
Connect the shield logger-sided to Ground (GND)